IMAGES:

 
  TELARD ROOFING SLATE

 

click to enlarge

Telard slate is a graphite coloured roofing slate, produced in Papagaio, Brazil to the strictest extraction and production regulations and is of the highest quality. Produced in three sizes: 600 x 300mm, 500 x 250mm & 400 x 250mm. They are preholed to laps of 100mm. They have a nominal thickness of 5 - 7mm. The slates are split to produce a product consistent in thickness and texture. The slates are rectangle with chamfered edges and a moderately textured surface. Being a natural product you will get a variation in the graphite colour. This adds to the natural appearance of the roof. Slate & a halves are also available.

Sizes and Thickness
All slates can be manufactured to client specifications.
Finishes
Chiseled edge Diamond Sawn Edges
Preholed Holes to clients specification

 

  TELARD SLABS

 

click to enlarge

The slate has excellent climatic resistance properties. It is totally unaffected by atmospheric pollution, and is fire resistant. It offers the specifier or builder the ideal roofing product to suit all extremes.
Sizes and Thickness

Sizes from 2m - 20cm x 1m -40cm (7-1/4' x 4 1/2')

Thickness 2cm, 3cm, 4cm - To specification

Finishes

Beveled

 Honed
Brushed Padded
Bull nose

Sandblasted
Calibrated / Gauged Sawn edge
Tumbled Cut to size

 

  TELARD TILES

click to enlarge

Sizes - Thickness

CENTIMETERS
INCHES
MILLIMETERS
INCHES
20X20
08X08
15X30
06X12

Ranging from:
Ranging from:
20X30
08X12
4 to 6
1/8 to 1/4
20X40
08X16
8 to 10
1/4 to 1/2
30X30
08X16
8 to 15
3/8 to 1/2
30X40
12X12
1/2 to 5/8
40X40
16X16
25X50
10X20
50X50
20X20
Ranging from:
Ranging from:
30X60
12X24
6 to 8
1/4 to 3/8
40X60
12X24
8 to 10
3/8 to 1/2
60X60
24X24
10 to 15
1/2 to 5/8
  TELARD SPECIFICATIONS

Performance Characteristics - Telard slate is regularly tested to BS680 part 2: 1971 requirements for roofing slates. Samples have passed the following parts. Wetting & drying tests (clause 6.2.2.) Acid immersion test (clause 6.2.3.

TELARD GRAHITE - Origin: Minas Gerais/Brazil

  • Visible Volumetric Mass............................................. 2736 kg/m3
  • Absortion Coefficient....................................................... 0,207 %
  • Breaking load through indirect stress by bending.......... 76,1 MPa
  • Breaking load through indirect stress by bending after cooling..... 30,9 MPa
  • Wear by atriction: abrasion coefficient in tribometer.......... 6,50m
 

SLATE | PROJECTS | QUARRIES | SHIPPING | CONTACT

USA Tel 850 479 8704 Fax 850 465 0715 | Brazil Tel. 55 27 3345 2526 Fax 55 27 3345 2387 |

Ireland Tel 353 (0)87 2300176 Mob.Tel. 353 (0)56 8832174

Email for inquiries : info@telard.com